Home > Manufacturers > Woodcraft

Woodcraft

Woodcraft
 

Products

Sort by: Product Price Default
 
  •  per page

Grid

/

List

Woodcraft 3 Piece Split Clip-on's
Sign in to rate
Woodcraft 3-piece split clipons are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible.

All kits include 12" bars that are easily adjustable to whatever width you desire.

Clip-On Fitment Guide
Our price: $147.24
Market price: $154.99 save 5%
Woodcraft 3 Piece Split Clip-on's 41mm Ninja 650R Specific
Sign in to rate
Woodcraft 3-piece split clipons are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible.

All kits include 12" bars that are easily adjustable to whatever width you desire.

This kit is Specific to the 06+ 650R Ninja and come with special spacers and bolts to allow them to be used on the Ninja 650 OE clamp.
Our price: $147.24
Market price: $154.99 save 5%
Woodcraft 3 Piece Split Clip-on's 50/48mm GSXR600/750 '06+
Sign in to rate
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible. The bars are 12" long and are easily adjusted to whatever custom width you desire.
The forks on these bikes taper just below the triple clamp to a smaller diameter, leaving traditional 50mm clipons with a clamping area that is not wide enough to grab the entire clipon. Unlike standard 50mm clipons, our stepped GSXR clipons allow you keep stock ride height or to lower your front end on the 06+ GSXR600/750 and still be able to properly clamp the fork.
These clipons are sold in pairs and include both handlebars. For the GSXR's, we recommend the 12-3245 reservoir mounting bracket with the purchase of these clipons.
Our price: $147.24
Market price: $154.99 save 5%
Woodcraft 3 Piece Split Clip-on's 50/49mm GSXR 1000 '01-04
Sign in to rate
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible. The bars are 12" long and are easily adjusted to whatever custom width you desire.

The forks on these bikes taper just below the triple clamp to a smaller diameter, leaving traditional 50mm clipons with a clamping area that is not wide enough to grab the entire clipon. Unlike standard 50mm clipons, our stepped GSXR clipons allow you keep stock ride height or to lower your front end and still be able to properly clamp the fork.

Note: 2003-2004 Models do not allow full lock steering to the right with stock steering stops due to the throttle cables contacting the ram air tube. Racers need to either 1) build up the steering stops, 2) rotate your throttle tube couterclockwise or 3) adapt 2004 GSXR 600/750 top exit throttle housing. Please call with any questions.
Our price: $147.24
Market price: $154.99 save 5%
Woodcraft 36mm EX Tower Assembly Ninja 250 '88-07 & 500 '87-93
Sign in to rate
These clipon towers bolt right on in the stock location with no interference on the tank, fairings or gauges. These clipon towers are lower than the OEM parts (about 1.5 inches on the Ninja 250 and 3 inches on the older EX500) and also have a comfortable 5 degree down angle instead of the completely flat OEM setup.

Racers and street riders alike have used these bars for years to give these bikes a much sportier feel. You will also get the added benefit of width adjustment and access to inexpensive replacement handlebars.

Includes bars.
Our price: $166.24
Woodcraft 37mm EX500 Ninja Clip-on Tower Assembly '94+
Sign in to rate
These clipon towers bolt right on in the stock location with no interference on the tank, fairings or gauges. These clipon towers are lower than the OEM parts (about 1.5 inches on the Ninja 250 and 3 inches on the older EX500) and also have a comfortable 5 degree down angle instead of the completely flat OEM setup.

Racers and street riders alike have used these bars for years to give these bikes a much sportier feel. You will also get the added benefit of width adjustment and access to inexpensive replacement handlebars.

Includes bars.
Our price: $166.24
Woodcraft Aprilia RS125 Full GP Rearset
Sign in to rate
The full rearset kit consists of the rearset plates, footpegs, hardware to install the kit properly, plus a complete brake pedal and shift pedal with an adjustable toe peg. These kits assume that you currently have the OEM rearsets on your bike for some of the stock components are re-used. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing.
Our price: $360.99
Market price: $369.99 save 2%
Woodcraft Aprilia RS250 Complete Rearset Kit w/3 Piece Pedals
Sign in to rate
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd.

This kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. They assume that you have the OEM rearsets, as some of the OEM hardware is re-used. Note: the brake pedal return spring is eliminated in this kit.

Moves pegs up and back 1"
Our price: $332.49
Market price: $349.99 save 5%
Woodcraft Aprilia RS250 Rearsets
Sign in to rate
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd.

This kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. They assume that you have the OEM rearsets, as some of the OEM hardware is re-used. This kit is upgradeable at any time to accept the 3 piece billet shift and brake pedals. Note: the brake pedal return spring is eliminated in this kit.

Moves pegs up and back 1"
Our price: $208.99
Market price: $219.99 save 5%
Woodcraft Aprilia RSV/R 04-09, Tuono 06-09 Frame Sliders
Sign in to rate
This special kit is the strongest set of sliders ever built for the new Aprilia's. Our billet offset bases are supported with an additional bracket that gives these sliders the strength they need to stand up in the event of a crash. It is necessary to cut holes in the fairing for mount these sliders.

Like all Woodcraft sliders, the patented solid plastic slider puck bolts in from the side rather than the top. This gives you 48% more material to slide on and greatly improves the life of these pucks.

Note: RSV requires cutting the bodywork on both sides.

Includes standard plastic pucks.
Our price: $142.49
Market price: $149.99 save 5%
Woodcraft Aprilia RSV4 Full Rearsets
Sign in to rate
Woodcraft is proud to introduce our rearsets for the beautiful new Aprilia RSV4. The rearset kit consists of the rearset plates, footpegs, heel guards and all of the needed hardware (shift rods, etc) to install the kit properly. They are much stronger than OEM rearset's and will give your bike a look that will separate you from the crowd.

This kit is designed specifically for the RSV4 to give you the optimum foot position and ground clearance for racing or track days. This kit has 6 possible peg locations moving the pegs in the following range : (Up 1/4-3/4" &Back 1/8-5/8"). This kit includes CFM 3 piece billet shift and brake pedals.

Our rearsets are machined from tough, aircraft grade 6061 T6 aluminum. We chose this material specifically because it provides the best combination of strength and durability. Other grades, such as 7075 generally tend to crack, instead of bend, when they are met with an impact. The use of 6061 allows our brackets to simply bend under stress instead of snapping off or cracking when they are crashed heavily. Rearsets made from 6061 can be often bent straight or even be welded (by a certified welder) whereas 7075 tends simply to crack or break and is much more difficult to weld.

(Up 1/4-3/4" & Back 1/8-5/8")
Our price: $379.99
Market price: $399.99 save 5%
Woodcraft Aprilia RSV4 LHS Stator Cover Protector Assbly Black W/Skid Plate Kit Choice/249H
Sign in to rate
Woodcraft 2-piece engine covers are designed to keep your bike oil tight in the event of a crash as well as to give your bike a custom look that will make you stand out in the crowd. All of our covers are 100% CNC machined from 6061 Aluminum billet to give you both great looks and exceptional strength.

The patented replaceable stainless steel (or Aluminum) skid plate adds wear resistance in the most vulnerable area and can keep your cover both functional and looking good through multiple crashes. The plate is internally bolted so that you don't have to worry about trying to remove bolts with the heads ground off.

Note: This is an engine cover protector. It bolts over the stator cover protecting the lower half that is vulnerable in a crash.
Our price: $118.74
Market price: $124.99 save 5%
Woodcraft Aprilia RSV4 RHS Cover Protector, Black W/Skid Plate Kit Choice
Sign in to rate
Woodcraft 2-piece engine covers are designed to keep your bike oil tight in the event of a crash as well as to give your bike a custom look that will make you stand out in the crowd. All of our covers are 100% CNC machined from 6061 Aluminum billet to give you both great looks and exceptional strength.

The patented replaceable stainless steel (or Aluminum) skid plate adds wear resistance in the most vulnerable area and can keep your cover both functional and looking good through multiple crashes. The plate is internally bolted so that you don't have to worry about trying to remove bolts with the heads ground off.

Note: This is an engine cover protector. It bolts over the clutch cover protecting the lower half that is vulnerable in a crash.
Our price: $237.49
Market price: $239.99 save 1%
Woodcraft Aprilia Tuono 02-05, Mille/MilleR 98-03 Rearsets, GP Shift w/shifter
Sign in to rate
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware to install the kit properly. A special CFM shift pedal, shift rod and knuckle are provided so that you can ride with a GP shift pattern (1 up, 5 down). These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. A special CFM eccentric adjuster is provided so that you can adjust the position of the brake pedal tip. These rearsets are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing.

Moves pegs up and back 1/2"

Note: Rearsets not exactly as shown. Photo for reference only.
Our price: $341.99
Market price: $349.99 save 2%
Woodcraft Aprilia Tuono 02-05, Mille/MilleR 98-03 Rearsets, Std Shift
Sign in to rate
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. Special CFM eccentric adjusters are provided so that you can adjust the position of the shift and brake pedal tip. These rearsets are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing.

Moves pegs up and back 1/2"
Our price: $227.99
Market price: $229.99 save 1%
Woodcraft Aprilia Tuono 06-10, RSV/R-Factory 04-09 Rearsets, GP Shift w/Shifter
Sign in to rate
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware to install the kit properly. A special CFM shift pedal, shift rod and knuckle are provided so that you can ride with a GP shift pattern (1 up, 5 down). These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. A special CFM eccentric adjuster is provided so that you can adjust the position of the brake pedal tip. These rearsets are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing.

Moves pegs up and back 1/2"
Our price: $341.99
Market price: $349.99 save 2%
Woodcraft Aprilia Tuono 06-10, RSV/R-Factory 04-09 Rearsets, Std Shift
Sign in to rate
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike, and utilize the OEM shift and brake pedals. Special CFM eccentric adjusters are provided so that you can adjust the position of the shift and brake pedal tip. These rearsets are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing.

Moves pegs up and back 1/2"
Our price: $227.99
Market price: $229.99 save 1%
Woodcraft Beanie
Sign in to rate
Woodcraft Beanie
Our price: $14.24
Market price: $14.99 save 5%
Woodcraft BMW S1000RR 10+ GP Shift Conversion Kit
Sign in to rate
All of the parts needed to covert your Woodcraft standard shift rearsets to GP shift.
Our price: $132.99
Woodcraft BMW S1000RR 10+ LHS Stator Cover Protector Assbly Black W/Skid Plate Kit Choice/249H
Sign in to rate
Woodcraft 2-piece engine covers are designed to keep your bike oil tight in the event of a crash as well as to give your bike a custom look that will make you stand out in the crowd. All of our covers are 100% CNC machined from 6061 Aluminum billet to give you both great looks and exceptional strength.

The patented replaceable stainless steel (or Aluminum) skid plate adds wear resistance in the most vulnerable area and can keep your cover both functional and looking good through multiple crashes. The plate is internally bolted so that you don't have to worry about trying to remove bolts with the heads ground off.

Note: This is an engine cover protector. It bolts over the clutch cover protecting the lower half that is vulnerable in a crash.
Our price: $137.74
Market price: $144.99 save 5%
Woodcraft BMW S1000RR 10+ Race Only Conversion Kit
Sign in to rate
All the necessary parts needed to covert our Street/Track Day rearets to a direct linkage race setup.
Our price: $127.99
Market price: $139.99 save 9%
Woodcraft BMW S1000RR 10+ Rearset Kit - GP Shift Complete W/Pedals
Sign in to rate
We are proud to announce our rearsets for the incredible new S1000RR. This kit features two position brackets, along with adjustable eccentric pegs, for a custom fit that is both comfortable yet provides optimum ground clearance for racing. The GP shift setup uses a special Woodcraft reversing link that keeps your rod running through the frame, out of harm's way, while utilizing the stock shift rod and quick shifter.

The complete rearset kit consists of the rearset plates, footpegs, heel guards, 3 piece billet pedals and all of the needed hardware to install the kit properly. This kit has adjustable eccentric pegs for a custom fit that both comfortable and durable. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd.

12 Position adjustable

Up 1/4"-1 1/8" Back 3/8"-7/8"
Our price: $465.49
Woodcraft BMW S1000RR 10+ Rearset Kit - Standard Shift W/Pedals
Sign in to rate
We are proud to announce our rearsets for the incredible new S1000RR. This kit features two position brackets, along with adjustable eccentric pegs, for a custom fit that is both comfortable yet provides optimum ground clearance for racing. The standard shift setup keeps your rod running through the frame, out of harm's way, while utilizing the stock shift rod and quick shifter.

The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet pedals, heel guards and all of the needed hardware to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd.

12 Position adjustable

Up 1/4"-1 1/8" Back 3/8"-7/8"
Our price: $465.49
Woodcraft BMW S1000RR 10+ Rearset Kit- Race Only
Sign in to rate
Our new "Race Only" rearsets are designed specifically for top racers to give them the simplest set up possible. We relocated the shift pedal from the rearset bracket to the kickstand mount (eliminating the kickstand) for a quick action direct linkage setup. This gives racers the optimal ratio for high speed/high rpm upshifts while keeping the stock quick shifter intact. The simple design eliminates parts giving you fewer parts to replace if the rearsets are damaged in a crash.

Our rearsets are machined from tough, aircraft grade 6061 T6 aluminum. We chose this material specifically because it provides the best combination of strength and durability. Other grades, such as 7075 generally tend to crack, instead of bend, when they are met with an impact. The use of 6061 allows our brackets to simply bend under stress instead of snapping off or cracking when they are crashed heavily. Rearsets made from 6061 can be often bent straight or even be welded (by a certified welder) whereas 7075 tends simply to crack or break and is much more difficult to weld.

12 Position adjustable

Up 1/4"-1 1/8" Back 3/8"-7/8"

For Racing Use Only.
Our price: $465.49
Woodcraft BMW S1000RR 10+ RHS Crankshaft Cover Assbly Black W/Skid Plate Kit Choice (337H) Uses Liquid Gasket
Sign in to rate
Woodcraft 2-piece engine covers are designed to keep your bike oil tight in the event of a crash as well as to give your bike a custom look that will make you stand out in the crowd. All of our covers are 100% CNC machined from 6061 Aluminum billet to give you both great looks and exceptional strength.

The patented replaceable skid plate adds wear resistance in the most vulnerable area and can keep your cover both functional and looking good through multiple crashes. The plate is internally bolted and o-ring sealed so that you don't have to worry about trying to remove bolts with the heads ground off.

Note: Aluminum skid plate recommended on this model.
Our price: $137.74
Market price: $144.99 save 5%
Woodcraft BMW S1000RR 10+ Standard Shift Conversion Kit
Sign in to rate
All of the needed parts to covert your Woodcraft GP shift rearsets to standard shift.
Our price: $132.99
Woodcraft BMW S1000RR Frame Slider Kit
Sign in to rate
Woodcraft frame sliders stand out in a market crowded with look-alike options. Our patent pending design features a slider puck that can be replaced with one bolt. What makes the Woodcraft design unique is the perpendicular attachment bolt for the puck. Because we do not have to hollow out the center of the puck, we can leave the sliding surface of the puck solid. This provides 48% more plastic to slide on, dramatically improving puck life. The side mount also eliminates the hassle of trying to dig out a puck replacement bolt through a distorted hole.

For racing, this model uses a special universal shorty slider puck (part number 50-1399) that gives the perfect amount of puck protruding from the fairing.

These sliders require cutting the bodywork on the right side. Making solid sliders with no offsets is absolutely the best way to protect your bike in a crash - giving the slider maximum strength to resist bending and breaking. Offset sliders can break and sometimes do more damage than they prevent (like breaking frames). We will only sell what we race with ourselves and believe these to be the best frame sliders available for this bike.

Includes standard plastic pucks.
Our price: $66.49
Market price: $69.99 save 5%
Woodcraft Brake Pressure Switch Assemby
Sign in to rate
These universal switches allow rearset users to operate the rear brake light. This all-in-one unit replaces the banjo bolt that connects the rear master cylinder to the rear brake line. You simply replace the bolt with this assembly and splice the wires into your existing brake light switch. The pressure inside your brake system then activates the brake light.

Fitment

10mm X 1.0

All modern Aprilia, Ducati
Yamaha up to 2002,
Suzuki up to 02 (most) & 2003 only GSXR600/750

10mm X 1.25

All modern Honda, Kawasaki, Triumph
Yamaha 2002 & up
Suzuki 2003 & up (SV & GSXR1000) 04+ (all other)
Our price: $18.99
Market price: $19.99 save 5%
Woodcraft Brake Reservoir Bracket 05+ GSXR1000, 06+ GSXR600/750
Sign in to rate
This bracket is a simple solution to mount your master cylinder bracket on a late model Suzuki. You simply remove the top triple clamp bolt and secure this bracket to the top clamp, giving you a solid place to bolt the reservoir. Sold with hardware to make the job complete.

Fits:

06+ GSXR600
06+ GSXR750
05+ GSXR1000
Our price: $11.99
Woodcraft Brake Reservoir Bracket Suzuki GSXR600/750 to '05, GSXR1000 to '04
Sign in to rate
This bracket is a simple solution to mount your master cylinder bracket on a late model Suzuki. You simply remove the top triple clamp bolt and secure this bracket to the top clamp, giving you a solid place to bolt the reservoir. Sold with hardware to make the job complete.

Fits: 01-05 GSXR600
00-05 GSXR750
01-04 GSXR1000
Our price: $8.99
Woodcraft Brake Side Hand Guard Assembly
Sign in to rate
Woodcraft's new brake lever guard is designed to keep another rider from accidentally hitting your front brake during close racing. The adjustable guard is made from tough plastic and bolted to a CNC-machined aluminum base. The guards are available individually or in sets (left+right).

FIM is now mandating that all motorcycles competing in World Championship Grand Prix Racing be equipped with brake lever protection!
Our price: $104.49
Market price: $109.99 save 5%
Woodcraft Buell XB9/12 Complete Rearsets GP Shift
Sign in to rate
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike.

They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. This kit is one of the most durable we have ever made, and has survived extremely well when crashed. This kit was delveloped with factory riders to give you the optimum foot position and ground clearance for racing.

These rearsets come complete with eccentric adjustable footpegs and the three piece shift and brake pedals.

The pegs can be moved 1/4" to 3/4" back and 0 to 1/2" up. These kits have been used by top Buell teams including some Buell factory riders in AMA Formula Xtreme Competition.
Our price: $332.49
Market price: $349.99 save 5%
Woodcraft Buell XB9/12 Complete Rearsets Standard Shift
Sign in to rate
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike.

They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. This kit is one of the most durable we have ever made, and has survived extremely well when crashed. This kit was delveloped with factory riders to give you the optimum foot position and ground clearance for racing.

These rearsets come complete with eccentric adjustable footpegs and the three piece shift and brake pedals.

The pegs can be moved 1/4" to 3/4" back and 0 to 1/2" up. These kits have been used by top Buell teams including some Buell factory riders in AMA Formula Xtreme Competition.
Our price: $332.49
Market price: $349.99 save 5%
Woodcraft Clipon Riser 10mm Spacer Kit
Sign in to rate
10mm riser spacers will alleviate interferance issues with the stock top clamp on many models allowing the installation of riser clip-ons. These spacers mount in between the clamp and the riser, spacing the handlebars 10mm forward.
Our price: $37.99
Market price: $39.99 save 5%
Woodcraft Clipon Riser Set W/Bolts
Sign in to rate
Clipon Riser Set W/Bolts. Available in 1", 1.5", 2", 2.5", and 3" heights.

Riser plates ONLY work with Woodcraft Riser Clip-on's .
Our price: $71.25
Woodcraft Clutch Side Hand Guard Assembly
Sign in to rate
Woodcraft's new clutch lever guard is designed to keep another rider from accidentally hitting your clutch level during close racing. The adjustable guard is made from tough plastic and bolted to a CNC-machined aluminum base. The guards are available individually or in sets (left+right).

FIM is now mandating that all motorcycles competing in World Championship Grand Prix Racing be equipped with brake lever protection!

(Brake side pictured)
Our price: $104.49
Market price: $109.99 save 5%
Woodcraft Dual Temp Gen II Tire Warmers w/Soft carry case
Sign in to rate
Gen II Dual Temp Warmers

Our new Gen II Dual Temps warmers feature many upgrades over our popular Dual Temp tire warmers that were released in 2008. We went back to the drawing board completely redesigning many of the components. The result is what we feel to be the best multi-temp tire warmer on the market today. Try a set and we're sure you'll agree they are the best warmers you have ever used.

New Features

Redesigned dual temp switch- Our new Dual Temp switch is the direct result of customer feedback. The new recessed switch is surrounded by a tough plastic case protecting it from impacts. This design is much tougher yet the temperature is still easily selected by a gloved hand.

New Thermostats - Our new thermostats hold tighter temperature ranges and are more durable than ever guaranteeing a perfect heat cycle every time.

New Construction- We went through the entire warmer from end to end and upgraded every seam. Our new warmers are double stitched with a tough nylon thread ensuring they look good and will last through years of abuse.

Key Features:

Even Heat Distribution - The small gap heating element leaves smaller spaces between the coils, ensuring the whole tire is heated evenly, virtually eliminating cold spots.
Great Insulation - Our special insulation is extremely efficient allowing us to keep the warmer construction thin while still providing great performance. You will love how easy the low profile design makes installation and removal of the warmers.
Side Curtains - Our fleece side curtains eliminate the #1 cause of heat loss by protecting the tires from side winds. In many cases we have seen up to a 15 degree increase in rim temperature compared to warmers without them.
Easy to install / remove - A large one piece velcro strap secures the warmer to the tire without hooks or cords getting in the way.
Durable - We used only the best components and subjected all internal connections to rigorous tension tests to be sure these warmers are built to last.
LED Indicator Light - Pick your tire temp with the flick of a switch the display 'on' light is green and turns to red when the tire is at temperature.

Voltage: All Woodcraft tire warmers are designed to run off a 110V power source. Generator users will need 1000 watts minimum to run a set.

Free duffel bag carry case with every set!
Our price: $398.99
Woodcraft Ducati 696/796/1100 Monster 09+ Complete Rearset Kit
Sign in to rate
We worked long and hard on the monster rearsets and we are really happy with the result. After a thorough review we determined what this bike needed was ground clearance. The stock rearsets for this bike were officially the lowest rearsets we had ever measured.

They can be used for both standard and GP shift and they eliminate the passenger pegs. Our 3 piece CFM shift and brake pedals are included along with heel guards for both sides. You have the ability to keep or eliminate the side stand - the parts are included for either option.

Moves pegs up 2 1/2" (adjustable +/- 1/4") and back 1" (adjustable +/- 1/4")

Note: The stock pegs on this bike were very low, especially on the 696. We race tested these rearsets and found the position of the pegs to be excellent for the track. With the low seat height of the Monster, taller riders may find themselves a bit cramped. We found that removing the seat cover and adding some 1/2" or 3/4" seat foam, and recovering the seat made things much more comfortable. Please contact us directly if you need one of the spacers in the kit as a replacement (not on 'spare parts' listing).
Our price: $522.49
Woodcraft Ducati 748/1098/1198 '99+ RHS All (Dry) Clutch Cover Assbly Blk W/Skid Plate Kit Choice (249H)
Sign in to rate
This Woodcraft cover is carefully thought out..... it has large vents on the back side of the cover in order to allow your clutch to run cooler and last longer, and a solid front side to protect the clutch from flying road debris. This beauty comes complete with the trademark Woodcraft removable skid pad of your choice, and weighs a mere 12 oz. all complete.

Note Order 0247 replacement hardware if your cover has button head skidpad bolts or 0249 for flathead skidpad bolts.
Our price: $161.49
Market price: $169.99 save 5%
Woodcraft Ducati 748/916/996 Rearsets w/Shift Pedal & Heel Guards
Sign in to rate
The complete rearset kit consists of the rearset plates, footpegs, both CFM 3 piece shift and brake pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing.

Moves pegs up and back (1/4" to 3/4", depending on setting)

Note: Can be used in standard or GP shift.
Our price: $303.99
Woodcraft Ducati 748/916/996/998 Complete Rearset Kit
Sign in to rate
The complete rearset kit consists of the rearset plates, footpegs, both CFM 3 piece shift and brake pedals, heel guards and all of the needed hardware to install the kit properly. The kit utilizes the OEM shift rod. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing.

Moves pegs forward 1/2" and up either 0" or 1/2"

Works in either standard or GP shift
Our price: $370.49
Woodcraft Ducati 749/999 Complete Rearset Kit
Sign in to rate
Woodcraft worked hard to build a rearset fitting for the beautiful Ducati 749/999 Series. This kit is 6 position adjustable using our eccentric adjustable footpegs and super strong - carved out of solid billet stock and offset to clear the exhaust and swingarm on the 749/999. This rearset kit that comes complete with a shift pedal, shift rod, brake pedal and heel guards on both sides.

Any piece of this kit is available separately.

Note: Can be used in standard or GP shift.

Brake pedal included but not shown.
Our price: $398.99
Woodcraft Ducati 749/999 Rearsets W/Shifter Pedal
Sign in to rate
Woodcraft worked hard to build a rearset fitting for the beautiful Ducati 749/999 Series. This kit is 6 position adjustable using our eccentric adjustable footpegs and super strong - carved out of solid billet stock and offset to clear the exhaust and swingarm on the 749/999. This rearset kit comes complete with a shift pedal, shift rod and heel guards on both sides. The brake pedal is optional.

Any piece of this kit is available separately.

Note: Can be used in standard or GP shift.
Our price: $332.49
Woodcraft Ducati 848/1098/1198 Complete Rearset Kit
Sign in to rate
Woodcraft worked hard to build a rearset fitting for the beautiful Ducati 848 or 1098. This kit is 12 position adjustable and super strong - carved out of solid billet stock and offset to clear the exhaust and swingarm on these bikes. This is a complete rearset kit that comes complete with a shift pedal, brake pedal and billet heel guards on both sides.

We thoroughly tested these before production....our test rider even was kind enough to crash on them for us (oops) and found that they not only gave the needed ground clearance but held up perfectly.

Any piece of this kit is available separately.

Note: Can be used in standard or GP shift.
Our price: $379.99
Market price: $399.99 save 5%
Woodcraft Ducati 848/1098/1198 Frame Slider Kit
Sign in to rate
The frame slider kit for the 1098 spent a lot of time in R&D. The narrow engine makes for a somewhat long slider needed to reach the bodywork. We were concerned that a standard slider would have a tendendcy to bend and/or break - causing damage to the frame and engine. With this in mind, we made a support bracket that clamps securely to the frame to reinforce the slider. Again we had a test rider try them out (with a crash while racing) and they held up perfectly, helping to protect the tank and water pump. These are a little more expensive than our standard sliders, but well worth the investment when it comes to protecting your Italian beauty. NOTES: (1) Cutting 2 inch holes in the bodywork is required. (2) This kit requires the elimination and/or removal of the exhaust flapper valve motor. We confirmed with Ducati NA that this is just a low rpm noise reduction device. On our bike (which just has slipons) we trimmed off the small drain plug on the bottom of the piece and zip tied the valve motor to the frame about 1/4" above the original mount. All full exhaust systems we are aware of eliminate this device completely, so if you have a full system none of this will apply to you.

Includes standard plastic pucks.
Our price: $188.99
Market price: $209.99 save 10%
Woodcraft Ducati 848/1098/1198 Rearsets w/shift pedal
Sign in to rate
Woodcraft worked hard to build a rearset fitting for the beautiful Ducati 848 or 1098. This kit is 12 position adjustable and super strong - carved out of solid billet stock and offset to clear the exhaust and swingarm on these bikes. This is a complete rearset kit that comes complete with a shift pedal and billet heel guards on both sides. The brake pedal 09-0640 is optional. Please see the full kit 05-0640B (listed above) to order individually.

We thoroughly tested these before production....our test rider even was kind enough to crash on them for us (oops) and found that they not only gave the needed ground clearance but held up perfectly.

Any piece of this kit is available separately.

Note: Can be used in standard or GP shift.
Our price: $313.49
Market price: $329.99 save 5%
Woodcraft Ducati 848/1098/1198 Under Bodywork Frame Slider Kit
Sign in to rate
The frame slider kit for the 848/1098 spent a lot of time in R&D. The narrow engine makes for a somewhat long slider needed to reach the bodywork. We were concerned that a standard slider would have a tendendcy to bend and/or break - causing damage to the frame and engine.

With this in mind, we made a support bracket that clamps securely to the frame to reinforce the slider. Again we had a test rider try them out (with a crash while racing) and they held up perfectly, helping to protect the tank and water pump. These are a little more expensive than our standard sliders, but well worth the investment when it comes to protecting your Italian beauty.

This is a special set that sits behind the bodywork - offering valuable protection for the water pump & other vulnerable pieces, but which does not require cutting the bodywork. This kit utilizes our 50-1399 shorty pucks for replacement pucks.

NOTES: This kit requires the elimination and/or removal of the exhaust flapper valve motor. We confirmed with Ducati NA that this is just a low rpm noise reduction device. On our bike (which just has slipons) we trimmed off the small drain plug on the bottom of the piece and zip tied the valve motor to the frame about 1/4" above the original mount. All full exhaust systems we are aware of eliminate this device completely anyway, so if you have a full system none of this will apply to you.

Standard kit shown in photo.

Includes short plastic pucks.
Our price: $199.49
Market price: $209.99 save 5%
Woodcraft Ducati 91-98 750/900SS Complete Rearset Kit w/3 piece pedals
Sign in to rate
The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for each model of motorcycle to give you the optimum foot position and ground clearance for racing. In the event that you need replacement parts, any individual piece of this kit is available.

Moves pegs up and back 1"

Note: Can be used in standard or GP shift.
Our price: $341.99
Market price: $359.99 save 5%
Woodcraft Ducati 91-98 750/900SS Rearsets
Sign in to rate
The basic rearset kit consists of the rearset plates, footpegs and all of the needed hardware (shift rods, etc) to install the kit properly. These kits assume that you currently have the OEM rearsets on your bike and utilize the OEM shift and brake pedals. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing. Kits are upgradeable at any time to accept the 3 piece billet shift and brake pedals.

Moves pegs up and back 1"

Note: Can be used in standard or GP shift.
Our price: $218.49
Market price: $229.99 save 5%
Woodcraft Ducati 99-06 750-1000SS, Paul Smart Replica, 06 Sport Classic Complete Rearset Kit
Sign in to rate
The complete rearset kit consists of the rearset plates, footpegs, both CFM 3 piece shift and brake pedals and all of the needed hardware (shift rods, etc) to install the kit properly. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. Each kit is individually designed for your model of motorcycle to give you the optimum foot position and ground clearance for racing.

Moves pegs up and back (1/4" to 3/4", depending on setting)

Note: Can be used in standard or GP shift.
Our price: $360.99
  •  per page