Home > Yamaha > FZ1 > Electronics

Electronics

 

Products

Sort by: Product Price Default
 
  •  per page

Grid

/

List

12 oClock Labs SpeedoDRD Electronic Speedometer Calibrator (Y1 Yamaha, Triumph, Kawasaki & Suzuki)
Sign in to rate
•The smallest electronic speedometer/odometer calibration device in the world
•Saves max speed, which can be recalled to your stock speedometer gauge
•Widest calibration range on the market (ratio based and multiplier/divider capability)
•Built in testing mode to ensure proper installation
•Easier to setup than any other device on the market
•Priced below any competing product on the market
•Simple plug-in installation for many vehicles using factory OEM connectors
•Works for any 3 wire Hall Effect Sensor, or 2 wire Ground Switch Sensors
•Works for vehicles which display MPH or KPH
•Ability to convert MPH to KPH, or KPH to MPH
•Ratio based correction in 0.1% steps, up to 99.9% + or -
•Fractional frequency multiplier & divider with 0.1 steps, up to 99.9 + or -
•Weather proof design to protect against the elements
•18" wiring harness (1.5ft)
•3 year product replacement warranty
•Made in the USA

Y1 Version, direct plug-in for the following motorcycles:

Yamaha BT1100 Bulldog (2002-2006), Drag Star (1999-2006), FJR1300 [no ABS] (2001-2005), FZ1 [no ABS] (2001-2011), FZ6 [no ABS] (1998-2011), FZ6 [with ABS] (2006), FZ6R (2009-2011), FZ8 [no ABS] (2011), FZS1000 Fazer [no ABS] (2001-2011), FZS600 Fazer (1998-2003), Majesty 250 (2002-2010), Majesty 400 (2004-2010), Morphous (2007-2008), MT-01 (2005-2010), MT-03 (2006-2010), R1 [YZF-R1] (1998-2011), R6 [YZF-R6] (1998-2011), Raider (2008-2011), Road Star (1999-2010), Roadliner (2006-2010), Royal Star (1997-2010), Stratoliner (2006-2011), TDM900 [no ABS] (2002-2010), TDM900A [with ABS] (2004-2006), TMAX 500 (2001-2010), V-Star [lcd odometer] (1999-2011), Warrior (2002-2010), WR250R (2008-2012), WR250X (2008-2012), X-Max 250 (2006-2010), XJ6 [no ABS] (2009-2010), XJR1300 (2004-2010), XJR400 (2002-2007), XT660 (2004-2010), XV1600A Wild Star (1999-2005), XV1900A Midnight Star (2006-2010), XVS1100 Drag Star (1999-2006), XVS1300A Midnight Star (2007-2010), XVS950A Midnight Star (2009-2010), YFM660 Raptor ATV (2002-2005), YFM700 Raptor ATV (2005-2010), YS250 Fazer (2005-2007)

Kawasaki D-Tracker 125 (2010-2011), KLX125 (2010-2011), KLX250 [lcd odometer] (2003-2011), KLX250 [USA models] (2009-2011), KLX450R (2009-2011), VN1500 (2001-2008), VN1600 (2003-2009), Vulcan 1500 (2001-2008), Vulcan 1600 (2003-2009), ZX-12R (2000-2006)

Suzuki Boulevard M95 (2005-2007), VZ1600 Marauder (2004-2007)

Triumph America (2011), Bonneville (2010-2011), Daytona 600 (2003-2004), Daytona 650 (2005), Daytona 955i (2002-2006), Rocket III Roadster (2010-2011), Rocket III Standard (2004-2011), Rocket III Touring (2004-2011), Speed Four (2002-2006), Speed Triple (2002-2011), Speedmaster (2011), Sprint GT (1998-2011), Sprint RS (1999-2004), Sprint ST (1998-2011), Thruxton (2010-2011), Thunderbird (2010-2011), Tiger 1050 (2007-2011), Tiger 900 (1999-2000), Tiger 955i (2001-2006), TT 600 (2000-2003)

Our price: $70.00
Market price: $79.95 save 12%
12 oClock Labs SpeedoDRD Electronic Speedometer Calibrator (Y2 Yamaha)
Sign in to rate
•The smallest electronic speedometer/odometer calibration device in the world
•Saves max speed, which can be recalled to your stock speedometer gauge
•Widest calibration range on the market (ratio based and multiplier/divider capability)
•Built in testing mode to ensure proper installation
•Easier to setup than any other device on the market
•Priced below any competing product on the market
•Simple plug-in installation for many vehicles using factory OEM connectors
•Works for any 3 wire Hall Effect Sensor, or 2 wire Ground Switch Sensors
•Works for vehicles which display MPH or KPH
•Ability to convert MPH to KPH, or KPH to MPH
•Ratio based correction in 0.1% steps, up to 99.9% + or -
•Fractional frequency multiplier & divider with 0.1 steps, up to 99.9 + or -
•Weather proof design to protect against the elements
•18" wiring harness (1.5ft)
•3 year product replacement warranty
•Made in the USA

Y1 Version, direct plug-in for the following motorcycles:

Yamaha WR250F (2006-2011), WR450F (2006-2011)

Our price: $70.00
Market price: $79.95 save 12%
Servo Buddy For Yamaha
Sign in to rate
The Servo Buddy is a small, light weight servo fix that eliminates the need for the exhaust servo motor, which is not needed with any aftermarket exhaust system. These devices are typically called EXUP valves, SET valves or exhaust servos. Typically when you purchase an aftermarket exhaust, a small plate is included to bolt onto the top of the exhaust servo. The purpose of this plate is to restrict the servos movement so the bikes computer still thinks the exhaust valve is connected and working correctly, preventing the FI (fuel injection sometimes mistakenly called the F1) fault light from illuminating on the dash board.

The problem with these plates is they require you keep the servo motor installed, taking up a lot of valuable room that could be used for power commanders, traction control computers, quick shifters, or a huge variety of other accessories. Additionally, the servo motor is dead weight, providing no benefit. After all, half the benefit of that fancy exhaust system was to drop weight, right!

The servo buddy uses OEM connectors and easily snaps into place replacing the bulky servo motor. It can be zip-tied to the wire harness and takes up virtually no space. The body is shrunk wrapped rather than encased in a housing to provide the smallest footprint possible, while blending into the factory wire loom. It works by electrically mimicking the working exhaust servo so the computer thinks all is well with the exhaust circuit preventing the FI light from coming on due to exhaust faults while still keeping the lights other functionality to warn you if anything else is wrong with the bike! Simply disconnecting the FI light or putting tape over it could mask potentially serious problems and lead to a damaged engine.

To provide a reliable long service life, all parts were spec'd out to meet military or automotive standards meaning the device is tolerant to a wide temperature range. Additionally, the entire circuit board has been encased in a thick epoxy potting compound to provide protection from moisture and vibration. It will be EXTREMELY reliable under all conditions, whether your ride street, race, track, or adventure ride.

Servo Buddy weight = 20grams (0.6oz)

2002-2012 YZF-R6
2006-2009 YZF-R6S
2002-2012 YZF-R1
2006-2012 FZ1
Our price: $59.95
Market price: $69.95 save 14%